欢迎关注“一信泰质量”官方网站!

您当前的位置:网站首页 > 行业新闻 > 澳大利亚不再接受 EN 55022

澳大利亚不再接受 EN 55022

       Australia no longer accept EN 55022 and it taken placed by EN 55032.                          澳大利亚不再接受 EN55022 EMC 报告, 而被EN 55032 取代 。                                          From the ACMA’s viewpoint a supplier must be able to show the device complies with the mandated EMC standard on the date the device is first supplied to the Australian market - when it comes to the applicability dates, withdrawal dates, and any transition periods associated with the EN, IEC, or CISPR series of EMC standards, the ACMA only accepts the version(s) applicable on the date the device is first supplied to the Australian market. The supplier will have to determine which version(s) of an EN, IEC, or CISPR standard are applicable on a particular date as published in the Official Journal of the European Union. (OJEU).                                          根据澳大利亚ACMA的要求,产品在首次进入澳洲市场进口商需要有报告证明他的产品符合强制的EMC 标准. 当遇到各类EMC 标准如EN, IEC, CISPR 执行日期,取消日期,过渡期ACMA 承认并接受产品首次进入澳洲市场时的EMC 标准。 客户在选用标准版本时需要在OJEU 网站上去确认查询。                                                                                                             In the case of EN 55022, my reading of the OJEU (see extract below), indicates that EN 55022:2010, and its amendments, were superseded by EN 55032:2012 and EN 55022:2010 ceased to be an applicable EMC standard on 5/03/2017 – i.e. EN 55022 is no longer an applicable standard in the EU, as such EN 55022 is no longer applicable in Australia either.                                                                                                     OJEU 显示 EN 55022:2010 以及它的修订标准被EN 55032 取代,EN 55022:2010 在2017-03-05 日后不再适用, 欧盟不接受EN 55022:2010, 相应的澳洲也不接受EN 55022. The OJEU does not appear to be mention EN 55013 as such, until the OJEU lists this EMC standard as no longer applicable, it remains in force. EN 55013 在OJEU 里面没有提到,澳洲暂时还是可以接受直到OJEU 明确提到EN 55013 不再适用为止。

Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.                                                                                         Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.                                                                                                                                 虽然新的标准和被取代的标准要求是一样的,在新标准执行时,被取代的标准不再具备证明产品符合相关法令法规。

      了解更多有关信息,请联系:info@uttlab.com

上一篇文章:
下一篇文章:
关注我们
网站分享
网站统计
友情链接:ACBWLLCCCFCCIECEE
© CopyRight   2015-2018   深圳一信泰质量技术有限公司   版权所有   粤ICP备 15083430
地址:深圳市龙华新区清祥路1号宝能科技园6栋A座16楼   电话:0755-28230888   传真:0755-28230886   邮编:518109   邮箱:info@uttlab.com